闽台致新-G2053FC1U-双H桥电机驱动器 原装正品

闽台致新 G2053FC1U TSSOP-16  代理商主推 

General Description
The G2053 provides a dual-bridge motor driver solution
for toys, printers, and other mechatronic applications.
The device has two H-bridges and can drive two DC
bed motors, a bipolar stepper motor, solenoids, or
other inductive loads.
Each H-bridge output consists of a pair of N-channel
and P-channel MOSFETs, with circuitry that regulates
the winding current. With proper PCB design, each
H-bridge of the G2053 can drive up to 700mA RMS (or
DC) continuously, at 25°C with a VM supply of 5V. The
device can support peak currents of up to 1 A per
bridge. Current capability is reduced slightly at lower
VM voltages.
Internal shutdown functions with a fault output pin are
provided for overcurrent protection, short-circuit protection,
UVLO, and overtemperature. A low-power
sleep mode is also provided. 

Features
Dual H-Bridge Motor Driver With Current Control
1 or 2 DC Motors or 1 Stepper Motor
Low On-Resistance: HS + LS = 1735mΩ
(Typical, 25°C)
Output Current Capability (at VM = 5V, 25°C)
TSSOP-16 (FD) Package
0.7A RMS, 1A Peak per H-Bridge
1.4A RMS in Parallel Mode
TQFN3X3-16 and TQFN4X4-16 Package
0.6A RMS, 1A Peak per H-Bridge
1.2A RMS in Parallel Mode
Wide Power Supply Voltage Range 2.7 to 10.8V
Integrated Current Regulation
Easy Pulse-Width-Modulation (PWM) Interface
1.6μA Low-Current Sleep Mode (at 5V)
TSSOP-16 (FD), TQFN3X3-16 and TQFN4X4-16 Package
ProtectionFeatures
VM Undervoltage Lockout (UVLO)
Overcurrent Protection (OCP)
Thermal Shutdown (TSD)
Fault Indication Pin (nFAULT)

Applications
Point-of-Sale Printers
Video Security Cameras
Office Automation Machines
Gaming Machines
Robotics
Battery-Powered Toys